Reactivity Documentation
Cyanides, Inorganic |
mixed with |
Acrylates and Acrylic Acids |
Summary
- Generates gas: Reaction liberates gaseous products and may cause pressurization
- Generates heat: Exothermic reaction at ambient temperatures (releases heat)
- Intense or explosive reaction: Reaction may be particularly intense, violent, or explosive
- Polymerization hazard: Polymerization reaction may become intense and may cause pressurization
-
May produce the following gases:
- Carbon Dioxide
- Hydrogen Cyanide
- Hydrocarbons
Details
Reactivity Predictions (for each pair of reactive groups)
Acrylates and Acrylic Acids
Hazard Predictions
- Generates gas: Reaction liberates gaseous products and may cause pressurization
- Generates heat: Exothermic reaction at ambient temperatures (releases heat)
- Intense or explosive reaction: Reaction may be particularly intense, violent, or explosive
- Polymerization hazard: Polymerization reaction may become intense and may cause pressurization
Inorganic cyanides may react with acrylates to cause deactivation of inhibitors which prevent initiation of polymerization reactions in the acrylates (Predicted). This could result in polymerization of the acrylates. Flammable, toxic HCN may also be expected to be liberated in the reaction. Caution should be used before proceeding. Further research of comparable examples in the literature or very small scale, carefully controlled experiments may be needed to fully assess compatibility. The generation of gases may be rather slow, however confinement may lead to dangerous conditions.
Acrylates and acrylic acids are polymerizable materials and are typically inhibited with low ppm levels of antioxidants (inhibitors) to prevent premature polymerization chain reactions. Many of these inhibitors require dissolved oxygen to be effective. Inhibitor depletion is a function of time and temperature, with higher temperatures increasing depletion rates. These materials are known to be susceptible to destabilization due to low ppm levels of contaminants. Radical generating contaminants such as peroxides and azides are known to initiate monomer polymerization; however, the effects of seemingly benign materials are harder to predict. Therefore, extreme caution should be used in any contamination event. And the material should be presumed to be destabilized until testing and consultation with experts. Uncontrolled polymerization reactions can become adiabatic and lead to a serious runaway reaction with high temperatures and pressures. The general hazards of monomers are discussed in Frurip et al., Process Safety Progress (Vol. 14, No. 2) 1995.
Potential Gas Byproducts
- Carbon Dioxide (CO2)
- Hydrogen Cyanide (HCN)
- Hydrocarbons