Reactivity Documentation
Acrylates and Acrylic Acids |
mixed with |
Hydrocarbons, Aliphatic Unsaturated |
Summary
- Potentially hazardous: May be hazardous but unknown
Details
Reactivity Predictions (for each pair of reactive groups)
Acrylates and Acrylic Acids
Hazard Predictions
- Potentially hazardous: May be hazardous but unknown
Many conjugated dienes, including acrylates, can undergo addition reactions with alkenes or alkynes under certain conditions. This type of reaction, known as a Diels-Alder reaction, is promoted by acid catalysts and heat and may be rapid and exothermic in some cases (Loudon, Marc. 2002. Organic Chemistry. 4th ed. New York: Oxford University Press. p. 648).
Caution should be used before proceeding. Further research of comparable examples in the literature or very small scale, carefully controlled experiments may be needed to fully assess compatibility. Also, vinyl monomers may be destabilized by contaminants that may deactivate inhibitors. Certain unsaturated aliphatic hydrocarbons may form radicals which may initiate polymerization of acrylates.
Acrylates and acrylic acids are polymerizable materials and are typically inhibited with low ppm levels of antioxidants (inhibitors) to prevent premature polymerization chain reactions. Many of these inhibitors require dissolved oxygen to be effective. Inhibitor depletion is a function of time and temperature, with higher temperatures increasing depletion rates. These materials are known to be susceptible to destabilization due to low ppm levels of contaminants. Radical generating contaminants such as peroxides and azides are known to initiate monomer polymerization; however, the effects of seemingly benign materials are harder to predict. Therefore, extreme caution should be used in any contamination event. And the material should be presumed to be destabilized until testing and consultation with experts. Uncontrolled polymerization reactions can become adiabatic and lead to a serious runaway reaction with high temperatures and pressures. The general hazards of monomers are discussed in Frurip et al., Process Safety Progress (Vol. 14, No. 2) 1995.